Universal Electronics ATLAS CABLE 4-DEVICE Guide de l'utilisateur télécharger pdf (Page 18)

USING MACROS (continued)

To Clear A Macro:

1. On the remote control,press and hold SETUP

until the last-selected device key blinks twice,

then release SETUP.

2. Enter 9 - 9 - 5.The last-selected device key will

blink twice.

3. Press MACRO once.

4. Press and hold SETUP until the last-selected

device key blinks twice, then release SETUP.

NOTE: A macro will be cleared in the order it was

originally stored.

CHANGING VOLUME LOCK

On the Atlas Universal Remote Control,Global Volume Lock

is set to TV,so you can control TV volume while in the TV,

VCR, or Cable mode. If desired, you can still perform

Individual Volume Unlock on a selected device to set its

volume control for independent operation.

NOTE: If you lock the volume controls to the AUDIO mode, you will

still have control of the audio device’s volume in all other modes

(i.e., TV,VCR,and CBL).

To Unlock Volume Control For A Single Device

(Individual Volume Unlock):

1. Assuming Global Volume Lock is active, select a

mode on the remote control that you want to

unlock (e.g.,CBL) and press it once. Next, press

and hold SETUP until the device key blinks

twice, then release SETUP.

2. Enter 9 - 9 - 3.The last-selected device key will

blink twice.

3. Press VOL– once. The selected device key will

blink four times.

Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

Universal Electronics ATLAS CABLE 4-DEVICE Guide de l'utilisateur Page 18