Universal-electronics Atlas 4-DEVICE Universal Remote Control Manuel d'utilisateur télécharger pdf (Page 20)

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to

the Atlas Universal Remote Control after trying all of the

codes listed for your brand,or if your brand is not listed

at all, try searching for your code.

NOTE: To search for a code in the CBL mode, you’ll first need to

unlock the cable ID Lock – see “Programming ID Lock” on

page 22.

For example, to search for a code for your TV:

1. Turn on your TV.

2. On the remote control,press TV once.

Then press and hold SETUP until the

TV key blinks twice, then release SETUP.

3. Enter 9 - 9 - 1.The TV key will blink twice.

4. Aim the remote control at the the TV and slowly

alternate between pressing POWER and TV.

Stop when the TV turns off.

NOTE: In the search mode, the remote control will

send IR codes from its library to the selected

device, starting with the most popular code first.

5. Press SETUP once to lock in the code.

6. To search for the codes of your other devices,

repeat steps 1 through 5, but substitute the

appropriate key (i.e., AUD, VCR,or CBL) for

the (Audio,VCR, or Cable) device you are

searching for.

Atlas Manual 4/8/02 9:37 AM Page 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Pas de commentaire

Universal-electronics Atlas 4-DEVICE Universal Remote Control Manuel d'utilisateur Page 20